注冊了約 10 年
出售Vestax PDX-2000 MKII Turntable with case & stylus & slipmat
二手
HK$3,900 HK$5,000
賣家
DJCYRUS
查詢次數
1
瀏覽次數
373
刊登日期
93 日前
最後更新
1 日前
物品介紹
按下圖放大
Vestax PDX-2000 MKII Professionaliu Direct-Drive Turntable with case & stylus & slipmat
The Vestax PDX-2000MKII direct-drive turntable features a redesigned platter that has been lowered to 7mm (0.27”) and given a flatter edge surface for easier beatmatching and performance play. Also, the slipmat slips better thanks to the 6 canals on the platter’s topside. The height adjustment system allows accurate arm height setting and makes it easier to return to a preferred height setting. The turntable’s floating suspension system gives you superior anti-howling.
Fast and accurate beatmatching adjustment with a 100mm (3.93”) ±10% fine pitch control fader, without the center indent. The fader movement on the Vestax PDX-2000MKII has been tightened in order to allow smaller and more accurate pitch adjustments. The Ultra Pitch fader controls the pitch range by ±50%. Combined with the fine pitch fader, a total pitch control of ±60% is possible.
The Vestax turntable features a 0.5-second startup time thanks to a high-torque direct-drive motor. This powerful motor is controlled by an accurate digital servo, making pitch adjustments instantaneous.
The futuristic design of the Vestax PDX-2000MKII turntable features a high-density molded body for the best possible acoustic sounds and the highest reduction possible from feedback. The feet are made of molded polyacetal plastic to reduce the effect of external vibrations. Smooth rear face with recessed RCA connectors allows the DJ turntable to be placed flat against the mixer (or each other).
Features
Redesigned arm base with a height adjust bar for accurate settings
Hingeless dust cover allows vertical setup with included L-type RCA cable
Smaller and more accurate pitch adjustments
Ultra pitch fader controls the pitch range by ±50%
Combined with the fine pitch fader, control of ±60% is possible
Easy one-touch reverse switch makes the platter spin backwards instantly
From zero to desired RPM in 0.5 seconds
Speed, torque start/stop time of the high-power DC motor are all controlled by a high speed 32-bit CPU that increases the reaction time up to 1/100 seconds
Specifications
Motor: direct-drive DC motor
Starting torque: max. continuous acceleration torque 4.7 kg/cm - Constant speed torque 2.7kg/cm
Starting time: 0.5 sec (33-1/3 rpm)
Wow flutter: 0.07% W.R.M.
Tone arm: anti-skipping tone arm system
Dimensions: 18”W x 6”H x 14-3/4”D
Weight: 21 lbs.
Power: AC 220V, 50/60Hz
Electricity consumption: 40W
The Vestax PDX-2000MKII direct-drive turntable features a redesigned platter that has been lowered to 7mm (0.27”) and given a flatter edge surface for easier beatmatching and performance play. Also, the slipmat slips better thanks to the 6 canals on the platter’s topside. The height adjustment system allows accurate arm height setting and makes it easier to return to a preferred height setting. The turntable’s floating suspension system gives you superior anti-howling.
Fast and accurate beatmatching adjustment with a 100mm (3.93”) ±10% fine pitch control fader, without the center indent. The fader movement on the Vestax PDX-2000MKII has been tightened in order to allow smaller and more accurate pitch adjustments. The Ultra Pitch fader controls the pitch range by ±50%. Combined with the fine pitch fader, a total pitch control of ±60% is possible.
The Vestax turntable features a 0.5-second startup time thanks to a high-torque direct-drive motor. This powerful motor is controlled by an accurate digital servo, making pitch adjustments instantaneous.
The futuristic design of the Vestax PDX-2000MKII turntable features a high-density molded body for the best possible acoustic sounds and the highest reduction possible from feedback. The feet are made of molded polyacetal plastic to reduce the effect of external vibrations. Smooth rear face with recessed RCA connectors allows the DJ turntable to be placed flat against the mixer (or each other).
Features
Redesigned arm base with a height adjust bar for accurate settings
Hingeless dust cover allows vertical setup with included L-type RCA cable
Smaller and more accurate pitch adjustments
Ultra pitch fader controls the pitch range by ±50%
Combined with the fine pitch fader, control of ±60% is possible
Easy one-touch reverse switch makes the platter spin backwards instantly
From zero to desired RPM in 0.5 seconds
Speed, torque start/stop time of the high-power DC motor are all controlled by a high speed 32-bit CPU that increases the reaction time up to 1/100 seconds
Specifications
Motor: direct-drive DC motor
Starting torque: max. continuous acceleration torque 4.7 kg/cm - Constant speed torque 2.7kg/cm
Starting time: 0.5 sec (33-1/3 rpm)
Wow flutter: 0.07% W.R.M.
Tone arm: anti-skipping tone arm system
Dimensions: 18”W x 6”H x 14-3/4”D
Weight: 21 lbs.
Power: AC 220V, 50/60Hz
Electricity consumption: 40W
檢舉
公開查詢
DJCYRUS 的信用評價
未有評價
Success
